Locomotive Air Compressor Pressure Gauge
Application
The locomotive pressure gauge is mainly used for the pressure measurement of locomotive air compressor, hydraulic system or cylinder brake.
Principle
This instrument is composed of two independent measuring systems and indicating devices.lts working principle is based on the elastic deformation of the elastic element (spring steel in the measurement system).Under the pressure of the tested medium, the two ends of the spring tube are forced to produce corresponding displacement respectively, and the pull rod is rotated and amplified by the gear transmission mechanism. The red and black pointers on the fixed gear shaft will indicate the two tested on the dial respectively. The pressure gauge can measure two same or different pressures simultaneously. In addition, the interior can be equipped with LED light source lighting, soft light, it is convenient for driving observation at night.
Parameters
Diameter: φ100 mm
Pressure range: 0-1000kpa, 0-1200kpa, 0-1600kpa
Accuracy level: 1.6
Connection thread: M16x1.5
Working environment: -40°C-+ 70°C, relative humidity is not more than 85%
Lighting voltage: DC24V+20%
Insulation resistance: normally > 20 MΩ
Pressure performance: 1500V/50HZ, time 1 min
Operation
■With a sharp pressure changes or vibration environment.Plus environment protection device shall be added
■Please do not pull the instrument shell by hand in the installation or removal, should use a professional wrench for installation;
■Pressure gauges shall be horizontal or vertical installation.
■Measurement with explosion danger , easy to crystallization, easy solidification, corrosion resistance requirements, you should use Hakin special medium measuring instrument.
■The pressure gauge is to be used at an ambient temperature between -40°C~+70°C with a relative humidity not exceeding 85% (close to the lowest temperature will affect the normal work of the instrument)
Model Code
lf you have other requirements, please confirm with our company's technical department before customizing.
Pressure Range & Accuracy
Boundary Dimension
Demo Mode
Locomotive pressure gauge, (double pointer press pressure gauge or double car pressure gauge) outer diameter φ100 radial installation, range 0-1600kpa, thread M16x1.5
Order Remarks
Safety Warning
For safety, please select the correct of product. lf the product is selected or used improperly,it may cause property loss or personal injury.The designer and user of the system should be fully responsible for selecting the correct product and using the product in the correct way.